Loading... Please wait...

Our Newsletter


Fluke Networks DSP 4300 Cable Tester for sale

  • Image 1
Price:
$1,985.00
SKU:
CME10047
Brand:
Condition:
New
Availability:
Ready on stock
Minimum Purchase:
1 unit(s)
Maximum Purchase:
2 unit(s)
Quantity:
Bookmark and Share


Product Description

Fluke Networks DSP 4300 Cable Tester

 

  • Exceeds spec requirements for Cat 5, Cat 5e and Cat 6 with Level III Accuracy, employing the same DSP-4000 measurement capability independently verified UL
  • Delivers more accurate PASS results with the new revolutionaryPermanent Link Adapter - now included with the DSP-4300
  • Includes Cat 6 Channel Adapter and a Channel/Traffic Adapter so you're ready to test Cat 6 channel limits with DSP accuracy
  • Automatically diagnoses cabling faults and shows exact location in feet or meters
  • Has expanded 16 MB on-board memory and saves up to a full day's worth of testing (300 tests)
  • Ensures accurate data and saves you time by allowing you to download TIA-606A compliant Cable IDs to the DSP-4300
  • Includes removable memory card and the most advanced cable test management software package

 

Specifications

Cable Types Shielded and Unshielded Twisted Pair (STP and UTP) LAN Cabling:
  • TIA Category 3, 4, 5, 5E and 6: 100W
  • ISO/IEC Class C and D: 100W and 120W

Foil-Screened Twisted Pair (ScTP):

  • TIA Category 3, 4, 5, 5E and 6: 100W
  • ISO/IEC Class C and D: 100W and 120W

Shielded Twisted Pair (STP):

  • 150W IBM Type 1, 6, and 9(adapter required)

Coax:

  • 10BASE5 ThickNet, 10BASE2 ThinNet, RG-58, RG-58 Foam, RG-59, RG-59 Foam, RG-8, RG-8A/U, and RG-62

Fiber:

  • Multimode and singlemode fiber using fiber test accessories
Test Standards
  • TIA Category 3 and 5E per Addendum #5 to TIA/EIA-568A
  • TIA Category 5 (new) per TIA TSB-95
  • TIA Category 6 per TIA Addendum #1 to TIA/EIA-568B (draft)
  • ISO/IEC 11801 Class C and D (new)
  • ISO/IEC 11801-2000 Class C and D (new)
  • STP cabling, (IBM Type 1, 150 W)
  • ANSI TP-PMD
  • IEEE 802.3 10BASE5, 10BASE2
  • IEEE 802.3 10BASE-T, 100BASE-TX, 1000BASE-T
  • IEEE 802.5
Speed of Autotest Full Autotest of Cat 5 UTP cable, including 6 pair combinations for NEXT in both directions, in approximately 10 seconds.
Supported Tests (Range of test is determined by network or selected standard)
NEXT, NEXT @ Remote
Wire Map
Characteristic Impedance
Length
DC Loop Resistance
Propagation Delay
Return Loss (RL), RL @ Remote
Delay Skew
Attenuation
Attenuation-to-Crosstalk Ratio (ACR), ACR @ Remote
Power Sum ACR, PSACR @ Remote
ELFEXT, ELFEXT @ Remote
Power Sum ELFEXT, PSELFEXT @ Remote
Power Sum NEXT, PSNEXT @ Remote
LAN Traffic
  • Monitor provides an audible tone to indicate amount of traffic
  • Monitors 10BASE-T Ethernet traffic using the Monitor RJ45 jack
  • Monitors 100BASE-TX Ethernet traffic using the Monitor RJ45 jack
  • Auto-negotiates between 10BASE-T and 100BASE-TX using the Monitor RJ45 jack
  • Blinks the Link Light on a 10BASE-T, 10/100BASE-TX or a 100BASE-TX hub
Cable Tone Generator Provides a tone generator that can be detected by a handheld tone probe
Display Graphic bit-mapped LCD with back light and adjustable contrast
Test Connections Variable (depending on Link Interface Adapter used)
Input Protection Protected against continuous Telco voltages and 100 mA over-current. Occasional ISDN over-voltages will not cause damage
EMC EMC compliant
Case High impact plastic with shock absorbing overmold
Dimensions Main unit and smart remote including link interface adapter:
11" x 5" x 3" (28 cm x 12.7 cm x 7.6 cm)
Weight Main unit: 3 lbs., 4 oz (1.5 kg)
Smart remote: 3 lbs., 1 oz (1.4 kg)
Power Main instrument and smart remote:
Rechargeable NiMH battery 7.2V, 3400 mAH
Typical battery life 10-12 hours, with recharge time of 4 hours
May be charged while in the instrument (while operating or off-line)
Languages Supported English, French, German, Spanish, Italian, Portuguese, Japanese, and Simplified Chinese
Calibration Service center calibration period is 1 year. Self-calibration required every 30 days.



Find Similar Products by Category


Write your own product review

Product Reviews

This product hasn't received any reviews yet. Be the first to review this product!


Add to Wish List

Click the button below to add the Fluke Networks DSP 4300 Cable Tester for sale to your wish list.

You Recently Viewed...